3/8-Inch Female Flare by 3/8-Inch Male Pipe Thread Brass Adapter. Female flare by male pipe thread adapter. Change your Flare to NPT. Brass material lasts long. Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections. 3/8-Inch female flare by 3/8-Inch male pipe thread.
Application: For LP/natural gas, instrumentation, refrigeration, Suitable for truck, car, boat, garden, plumbing, heater, furnace repair. OUTDOOR USE. Consumer Note: It is recommended for the installation to be performed by a qualified person or licensed contractor, plumber, or gas-fitter technician. Use pipe thread sealant between all connectors for proper seal and leak test all connections prior to use as a safety measure. Not intended for Potable Drinking Water Use or Human Consumption Applications.
- Our Brass Adapter has a 3/8″ Male NPT x 3/5” Female Flare. Please note, the nominal size DOES NOT EQUAL actual diameter size. The male end has an actual diameter of 5/8in (1.6cm) OD and the Female end measures 5/8in (1.6cm) ID due to pipe sizing standards.
- [TIGHT CONNECTIONS]: The 3/8” Female Flare and 3/8” MNPT fittings create a secure and airtight fit when installed properly. Remember to always apply thread sealant tape or pipe dope to prevent leaks during installation.
- [WIDE RANGE OF USES]: This Gas Connector is made for a diverse range of propane, LPG, or natural gas applications for both high and low pressures. You can use this to connect your grills, RV’s, hoses, heaters, air compressors and many other applications. NPT connections require thread sealant tape or paste.
- [HEAVY-DUTY BRASS]: Our propane Gas Connector is made from 100% solid brass for superior corrosion resistance, durability, and long service life. Built to handle high BTU/hr and withstand hot and cold temperatures.
- Este adaptador tiene un 3/8″ macho NPT x 3/5″ destello femenino. Tenga en cuenta que el tamaño nominal NO ES IGUAL al tamaño real del diámetro. El extremo macho tiene un diámetro real de 1.6cm de diámetro exterior y el extremo hembra mide 1.6cm de ID debido a los estándares de tamaño de la tubería.
